Mjk-automation Shuttle Ultrasonic Level Transmitter and Sensor Manuel d'utilisateur télécharger pdf (Page 69)

SW 838023

GB Shuttle Manual 100316

Appendix

F New sensor / changing sensor

Shuttle

will be shipped and delivered from about July 1,

2007 with 1 of 4 different sensor types.

If, at some other time, the sensor is to be replaced by an-

other or a newer type, the following procedure can success-

fully be applied to re-conﬁgure the level transmitter.

Technical speciﬁcations are located on pages 37 - 40.

Open the choose sensor menu

Press 'Esc' + 'E'.

Consequently the (previously) selected sensor type is dis-

played (here: 20 and 0570 for sensor type 200570):

Press the 'Up' or 'Down' arrow key repeatedly until the fol-

lowing static display appears (no sensor):

Press 'Enter' twice whereafter the following menu travels

across the screen (Choose Sensor Press Enter):

Shuttle is now in the opening menu for a Shuttle delivered

without a sensor.

Press 'Enter' to enter the choose sensor menu, and press

the 'Up' or 'Down' arrow key repeatedly, until the required

sensor type appears.

Press 'Enter' to ﬁnish the conﬁguration.

Pas de commentaire

Mjk-automation Shuttle Ultrasonic Level Transmitter and Sensor Manuel d'utilisateur Page 69